How to Install a Ghost Immobiliser
Ghost immobilisers is a great deterrent to car thieves. Combining this device with other security tools and being vigilant can help you create strong defense against the modern, tech skilled thieves.
Ghost immobilisers protect your car from hotwiring and relay car thefts by requiring you enter an identification number to start the vehicle. It uses existing buttons in your centre console or steering wheel, which means it's not visible to thieves.
Identifying the Wires
With increasing instances of vehicles being taken away without the owner's key, it is vital to safeguard your vehicle. A ghost immobiliser is a great way to add a second layer of security to your vehicle. It blocks all signals coming from your key fob so that it's impossible to start the vehicle without entering a PIN.
While you can install a ghost ignition yourself, it is recommended to let a professional technician complete the job for you. A skilled professional will know the best location to put the unit in, and also how to connect it to the vehicle's wiring. Installation can be complex and it's crucial that the connections are made properly to avoid any damage or malfunctions.
Wearing safety equipment and working in a space that is well-lit will ensure you get the best results. It is also recommended to read the user manual and familiarise yourself with the wiring system. This will aid you in identifying the wires needed for the installation and make sure that you have the right tools and parts to do the job properly.
After the wiring is connected, you can reconnect your battery and test to see if the system is functioning properly. To prevent electrical problems it is important to ensure that the battery's terminals have been secured. Additionally, you should label the CAN H and L wires with labels or tape to keep the track of them during the installation process.
The Ghost Immobiliser allows you to put your vehicle into Transport Mode in the event that you require someone else to drive it for a short period of time for instance, for valet parking, or if the vehicle requires maintained. You can enter the code by pressing an option on the steering column, the centre console or door panels. The Ghost Immobiliser enters PIN code changing mode.
Some thieves attempt to evade an immobiliser that is ghostly by using spoofing or jamming devices to block or send fake signals to the system. This can be avoided by investing in advanced anti-jamming technologies and monitoring your Ghost Immobiliser for signs of altering the system.
Disconnecting the Battery
The ghost immobiliser is a modern security device, is designed to prevent car theft. It utilizes cutting-edge technology to detect the engine and then deactivate it when the correct PIN is entered. This protects the vehicle from being taken by thieves. The system is extremely efficient and discreet, without visible indicators to discourage criminals. You may need to remove your unit to ensure maintenance, upgrades or even when you sell your car.
This process requires specialized tools and skills, since you will be working using wires and bypassing specific factory components. It is also essential to follow the step-bystep instructions that are provided by the manufacturer of the ghost immobiliser. You should also consult an expert mechanic or auto electrician, particularly if you don't have any previous experience working on vehicles.
It is essential to assess the condition of your battery after disconnecting the wires. Verify that the battery is clean, free of corrosion and that all connections are secure. It is required to ensure that it is sufficient to meet the electrical demands of a security aftermarket.
After you have disconnected the wires, you can then remove the ghost immobiliser. Strippers or wire cutters can be used to cut off the wires. Be careful not to damage the terminals of the wires. Make sure to label each wire so that you can reconnect them correctly in the future. If the wires are soldered, use a heat-resistant tool to break the connection. To prevent short-circuiting, it is important to wrap the wires with insulation tape or heat shrink tubing.
Connect the wires back to the constant 12V power source. If necessary use an electrical fuse to ensure that the connections are protected by the fuse. Finally, connect the grounding wire to a grounded point on the chassis of the vehicle.
After you have connected the wires, restart your vehicle and enter the PIN code. Then, you can restart the engine. If it does not start the ghost immobiliser has been removed successfully.
Making the Connections
Ghost immobilisers are an affordable solution to increase the safety and security in your vehicle. It connects to the CAN bus system inside your vehicle, capturing signals, and preventing the vehicle from starting until the correct PIN code has been entered. It is virtually impossible to disable, making it an ideal option for drivers who need more security and peace of mind. It can lower your insurance premiums when used in conjunction with an Thatcham Approved Tracking System.
Obtaining and reviewing the wiring diagram for your car model is essential in the installation process. The diagram can serve as a guideline to identify the wires that are required for precise connections. Making use of the correct wiring connectors or soldering techniques will ensure that the connection is strong and secure.
The wires that connect the Ghost immobiliser to the CAN bus system have to be properly identified and connected. It is recommended to use small pieces of tape or labels to mark the CAN H and CAN L wires, since this will help to prevent confusion during the installation process. The locations of the wires will vary on every vehicle, so it is essential to refer to the vehicle's wiring diagram and online resources for identifying them.
Once autowatch ghost immobiliser cost are connected, power can be restored to the Ghost immobiliser. It is a great idea to test the immobiliser. Start the engine without entering the code. This will verify that the immobiliser is properly installed and is functioning as it should. It is crucial to test your immobiliser on a regular basis. This will allow you to identify any problems or issues early.
Another benefit of the ghost immobiliser is that it can be put in place in just a few minutes and doesn't require any cutting or modification to the internal wiring of your vehicle. It's a great option for those who want to add more security to their vehicle, since it works with an Thatcham approved alarm or tracker to notify you via your phone or tablet if the vehicle is tampered with.
Mounting the Unit
The Ghost immobiliser can be used as an deterrent to thieves of cars, particularly when combined with the use of a GPS tracking device. The device makes use of buttons on the centre console, door panels, and steering wheel to generate an exclusive sequence that only you can recognize to stop your vehicle from beginning. The device is also weatherproof and tamper-proof. It also comes with a three-year guarantee and is recommended by a range of insurance companies.
It is crucial to follow the instructions when installing the device. If you're unsure, it is best to seek out an expert. A multimeter and wire stripper are essential tools to identify the wiring and making precise connections. It is also recommended to purchase electrical tape and insulation to shield the connections from damage. It's a great idea to test your device after the installation is complete to make sure that everything works as it should.
A Ghost immobiliser is an excellent method to guard your vehicle against theft, particularly in areas of high crime. It prevents key cloning, ECU swapping and other security threats, and it can be paired with an iPhone application for simple management and monitoring. It's a favorite choice for those who own vehicles who want to safeguard their investment, and it's easy to install.
The Ghost II immobiliser features a sleek design and low-profile that makes it difficult to spot for thieves. It connects to the CAN (Controller Area Network) system of your vehicle. It prevents the engine from starting until a PIN code has been entered. The PIN code is generated by pressing a series of buttons on your steering wheel, console or door. It can also be changed at any point. The device is also tamper proof and comes with a GPS tracker that can assist police find your car in the event of theft. It's a great option for protecting your vehicle from thieves and is Thatcham approved.