Autowatch Ghost Immobiliser
The renowned Ghost Immobiliser provides your vehicle with a high level of protection against key cloning as well as theft, hacking and hacking. This TASSA verified system remains undetectable to thieves and blocks the thieves from starting your vehicle.
This device is silent and uses buttons on your vehicle's steering wheel as well as the door panels and the centre console to permit you to set a unique PIN sequence that can be changed up to 20 characters which must be entered prior to the car can begin.
Easy to install
With car theft on the rise and cloning tools readily available, it is more important than ever to protect your vehicle. Our Autowatch Ghost immobiliser provides a discrete, effective and aftermarket solution to protect against key cloning and vehicle theft. It is virtually undetectable by thieves and works through buttons on the steering wheel and door panels as well as the centre console. This allows customers to create an exclusive disarm sequence that is like a credit card which must be entered before the vehicle is able to start or leave. This makes it virtually impossible to detect and is not affected by blocking devices or spoofing devices like other systems.
The installation of the Ghost unit is a highly-specialized procedure that should only be carried out by an authorized installer. The unit is carefully incorporated into the CAN bus network of your vehicle, ensuring that it communicates directly with the ECU. The Ghost can be installed without affecting the factory settings. It is virtually impossible for thieves to evade the system by using signal boosters.
After the Ghost is fitted, a new and improved sequence to disarm must be entered to turn on your car. This can be accomplished by pressing the service button on your vehicle 5 times within 2 seconds, while ensuring that it's not repeatedly pressed for a long period of time. The system will flash twice to show that Transport Mode is active. This feature is perfect for classic, sports or prestige vehicles that require their security system to be temporarily disabled during transport or servicing.
When the Transport Mode is activated the immobiliser will be disabled and you cannot activate it again by entering the PIN code. This feature is ideal for those who wish to store their vehicles over the winter months to keep them from being stolen or to avoid paying higher insurance costs.
There are no keyfobs or LEDs, or other indicators to help you locate it.
The Ghost immobiliser is a discrete device that shields your joy and pride from car thieves by utilizing buttons on your steering wheel or dashboard to input a discreet pin code prior to starting the engine. It protects against attacks on signal relays, ECU swapping and key cloning. It also connects to a smartphone application that allows remote arming and disarming. It's simple to install, and can be put in a range of vehicles. It's also extremely discreet and can be hidden in a difficult-to-find location, such as behind the dashboard or within the trim of the steering wheel.
This is a fantastic option for high-performance vehicles since it will disable your vehicle's ignition in the event that the incorrect pin code is entered. This prevents thieves from driving away with your pride and happiness. The device can notify a smartphone if the car is left unattended while in public. This gives you peace of mind while away from your car.
The Ghost is different from other immobilisers because it does not require additional fobs or LED indicators. It can also be hidden in an area that is difficult to reach your vehicle. It is highly resistant to detection because it communicates directly with the CAN data network of your vehicle. It also doesn't emit radio signals, so it's unnoticeable by RF scanners or signal jammers.
It is designed to be tamper-proof and weatherproof. It can also withstand extreme temperatures. It's also not possible to interfere with by cutting the wires or dismantling the device. Additionally, it doesn't need any cuts in the circuit to function, so it's undetectable to organised thief gangs that use diagnostics reading devices to identify the security systems fitted to. It's not affected by diagnostic equipment that checks the CAN data for the presence or absence of security systems.
No circuit cuts
The ghost device doesn't have any indicators with LEDs or key fobs that would indicate its whereabouts. It is hidden beneath the steering wheel or dashboard of your vehicle and makes use of buttons to create an unique PIN sequence that has to be entered to start the engine. The thief cannot drive away the vehicle even if they have your keys because they don't know the correct code. The device cannot transmit radio signals, and therefore organized gangs of thieves who use tools for reading diagnostics will be in a position to not be able to recognize it.
This advanced immobiliser is TASSA approved and could help lower your insurance premiums, especially for modified vehicles that have been modified by their owners. It also stops key cloning theft, as well as ECU swapping meaning that the only way the criminal can steal your pride and joy is to tow it away.
The system is completely silent as it does not use the factory keys or dashboard buttons. It communicates with the ECU by using the CAN data circuit, which is completely silent and doesn't give any indication that it was installed. This means that a burglar cannot replace the ECU or even add new key fobs to get your car started.
If you forget your PIN code, our engineers have provided you with an emergency reset option for the device that allows you to enter'service mode'. This will allow dealers or technicians to temporarily drive and start your vehicle and perform maintenance work, MOTs or valet parking. Once the technician has finished their task or you have collected your vehicle, simply enter the PIN code and the device will exit service mode depending on the speed and time.
No radio signals
Unlike many other car security systems, the Ghost immobiliser does not rely on an alarm system or key fobs to block vehicles from starting. Instead, it communicates with the vehicle's ECU and CAN data circuits to prevent the engine from starting. This makes it a discreet solution that isn't affected by key cloning techniques or RF scanning techniques employed by thieves to circumvent other security devices. It can also be used with tracking systems to improve the overall safety of your vehicle. It will also be alerted to any attempts at theft or tampering.
The Autowatch Ghost, a TASSA certified device, is affixed to insurance and provides superior security against key hacking and copying. It uses a mobile application to control the device. It is encrypted to protect. It comes with a secure emergency PIN override. It is a discreet effective and economical method to protect your vehicle from theft.
However, the Ghost is not without issues. ghost 2 immobiliser problems have trouble entering the correct sequence of disarming. The device requires input via buttons already present on your vehicle, like the ones on the steering column or centre console. It can be difficult for users to remember or make a mistake, especially when the device is being used for the first time. It is advisable to read the manual included with the device to learn this and practice the process of disarming prior to driving the vehicle.
A second issue is that some vehicles have issues with the CAN data connections, which can impact Ghost's capabilities. This could be caused by faulty sensors or a damaged OBD port. It is recommended to test the system again before you use it in case the CAN connection is faulty.
It is easy to change the PIN code
The Ghost is an excellent product that has enjoyed a great reception on the market. However, the process of changing the pin code can be a bit confusing. The device is programmed by the installer at the time of installation, however customers may want to change it for various reasons. For instance, they might prefer a different button that disarms the device or do not want their installer to be aware. They may also not like the pin code they currently have. The good news is that the switch to a new pin number is extremely simple. Follow the simple steps below to find out how.
Note: You must turn on the vehicles ignition but do not start the engine! The process takes only a few seconds to complete. The vehicle will then resume normal operation.